Right angle gearbox

Right Angle Miter Gearbox Standard Features
Dimensions: right position miter equipment drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile metal. Any shaft may be used as a drive.
Gears: Hardened straight miter gears
Bearings: Hardened metal ball bearings, long lasting lubrication
Mounting: Three shaft mounting positions provide versatility in application
Versatile: 3 shaft connections are given for versatility in application
RAB-1 could be operated CW, CCW or Back again driven
RAB-1 is rated at 1/3 HP in 1800 RPM. Maximum acceleration is 3000 RPM
Benefits and COST BENEFITS
Longer service life
Less wear
Greater tooth-to-tooth contact
Quieter operation
The most effective power transfer design under rated load conditions
Custom Options
Stainless steel shaft (Please specify series stainless needed)
Longer shafts lengths upon input and output
2:1 Ratio
Right Angle Drives Made with Advanced Quality Construction
Ever-Power 2-Way Right Angle Gearboxes transmit power with calm, reliable spiral bevel gears. These high quality bevel gearmotors feature hardened spiral bevel gears and nonmagnetic stainless-steel shafts. Our Two-Way 90° Gearboxes are also compact and show multiple mounting options. The fully enclosed design guarantees the integrity of the internal gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Right Angle 2-Method Gearboxes are made for maximum strength and heat dissipation. The drives are available with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We are able to quote several unique types of shafts as well, including:
Squared
Splined
Extended
Shortened
Stepped
Two Way 90 Degree Gearbox Applications
Ever-Power Right Position Miter Gearboxes are used throughout a large number of industries in hundreds of applications. Any make use of that demands the dependable transfer of acceleration or power, you could find a two-way gearbox bearing the Ever-Power brand. The small design of Ever-Power Two-Way Right-Angle Gearboxes makes them perfect for applications such as for example:
Food Processing Equipment
Ovens & Dryers
Tumbling Barrels
Power Transmission Equipment
Register Controls
Stokers
Case Openers
Paper Rewinders
Test Equipment
Ever-Power Inc, offering the most reliable and reliable transfer of power in the marketplace. Our company is well known for its innovative styles and producing high-quality movement control solutions made for engineered functionality and durability. We offer a range of gearbox designs and a broad selection of versatile shaft couplings to supply you with a complete solutions for your mechanical and power tranny applications.
Right Angle Gearbox
Right angle gearboxes are seen as a the fact that the drive shaft and the result shaft are organized at an angle of 90 degrees. Depending on the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results in an axis offset.
Right angle gearboxes are noticed with various kinds of gear teeth or a mixture of different gearing types. The most famous single-stage gearbox types are bevel and worm.
Due to the high solitary stage ratios and the reduced effectiveness level, worm gears can perform a self-locking effect. With worm gears it is also possible to get a hollow shaft as the drive shaft.
Bevel gearboxes include various kinds of gearing. Bevel gearboxes with intersecting axes are recognized using bevel gearing with directly, helical or spiral tooth. Hypoid gearboxes have helical bevel gearing with which the axes cross with an axis offset. The bandwidth of technically practical ratios with that your bevel gear stage could be realized is larger with hypoid gearboxes than with the classical bevel equipment teeth.
Bevel gearboxes may also be combined with various other gearbox types. A regular program in this respect is the combination with a planetary gearbox, whereby the planetary gearbox could be connected upstream or downstream. This results in a wide selection of overall multiplication factors and wide selection of uses in many industrial applications.
The efficiency degree of bevel gearboxes is normally less than that of coaxial spur gearboxes, particularly compared to planetary gearboxes. That is because the bevel equipment stage generates a higher degree of axial pressure and radial drive, which has to be absorbed by appropriate bearings. This increases the power loss, which is particularly significant in the drive stage of the gearbox.
The working noise and the transmittable torques of classic bevel gearboxes are also lower than with single spur gear teeth. Hypoid gearboxes, on the other hand, are incredibly noisy and may transmit large amounts of torque, but a considerable amount of bearing load takes place in the bevel gear stage of these gearboxes.
In summarizing, the right angle gearbox is constantly used when the amount of installation space in the application form is bound, or an angular arrangement between your drive and the output is necessary by the application. Also, they are used in instances where in fact the input shaft needs to be hollow to be able to business lead through lines or make use of clamping sets.
The benefits of right angle gearboxes:
Use when set up space is limited
Compact design
Can be coupled with other types of gearbox
Quiet and high amount of torque when using hypoid gearboxes
Version with hollow shaft possible
The disadvantages of right angle gearboxes:
Complex design
Lower efficiency level than planetary gearbox
Noisier
Cheaper torques in single-stage ratio range
The Ever-Power, the original right angle gearbox drive, is widely recognized and is used worldwide. The Ever-Power provides manual or power transmission of rotary motion in a concise, standardized right angle device.
Our standard type of bevel gearboxes are available from share in both an In . and Metric Series, solitary or dual result shafts, 1:one or two 2:1 ratios, and grease lubricated forever and also have an operating temperature selection of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Utilizing carburized case-hardened Coniflex* bevel gears, all Ever-Power units utilize totally enclosed & sealed ball bearings.
The cast aluminum housings upon our 90 degree gearboxes are precision machined, on our CNC machining center and coated with a chemical substance film to protect the materials, and use flanged ends and side bosses for compact installation in an array of applications.
The shaft materials used for sizes 1, 2 and 3 is #416 stainless. On the 2 2:1 models, the pinion shaft is definitely carbon metal. For the sizes 4 & 5, the materials is dark oxide carbon steel. Shafts can be given special extensions (with flats, splines, holes, etc.) and /or specific lengths upon ask for.
In addition to your standard versions, we will modify our units to meet your design specifications! Our sales and engineering departments are ready to assist you with your specific application requirements.
Over the years we’ve received questions about nearly every part of the gearbox selection process. One of the queries we’ve had several times is, “Exactly what is a right-angle gearbox or a right-angle drive?” Or, more specifically, “How is a right-position gearbox or drive not the same as a swiftness reducer or other types of gearboxes?”
gear-speed-reducer-1-2.png
First, let’s start with some basic terminology. It isn’t uncommon for the terms “gearbox”, “drive” and “speed reducer” to be used interchangeably.
A gearbox is any gadget that uses a gear train to transmit torque/rpm and anything that uses a equipment to transmit torque/rpm is a gearbox.
A right-angle drive is a mechanism with a gear teach that may transmit torque/rpm 90 degrees, to turn a corner
A equipment reducer is a mechanism with a gear teach that can reduce rpm output. Due to decreasing rpm is increasing torque at the same ratio velocity is reduced.
A gear box may also be a speed increaser
The type of gear used in the gear box defines it as the right angle or an inline drive.
A worm gear drive is a right-angle drive since is a bevel gear
A spur equipment drive is inline
A helical equipment is inline but can also be a right-angle drive
So, what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in the direction of the shaft. It’s rather a 1 to at least one 1 ratio or a multiple of just one 1 such as 2:1 or 15:1. If the ratio is 1:1 it is a right-position drive. If the ratio can be greater than 1:1 it is a right-angle swiftness reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outdoors contaminants for smooth operation
Right- or left-hands rotation to convert power either direction
Quickly slides axially along the drive or driven shaft for flexible positioning
Alloy steel helical gears for powerful
Built-in 5 sizes with 3 types of result shaft : hollow, projecting or double-extended. Moreover, an additional output shaft can be installed reverse to the insight shaft.
Three input types are available : with projecting input shaft, with pre-engineered motor coupling (bell and joint) and pre-engineered COMPACT motor coupling.
Gear device body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to ensure rigidity and machined on all areas for easy positioning. The single lubrication chamber guarantees improved heat dissipation and better lubrication of all internal components.
The mechanism of these gearboxes includes two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 manufactured from steel.
The use of high quality bearings on all the axis ensures extended life to the gearbox and allows high radial and axial loads.
Gearbox housing, flanges, bells and covers are externally painted with BLUE RAL 5010.