small worm gearbox

Small Precison Worm Reduction Gearboxes
There are a number of specifications you will have to consider when coming up with a worm gearbox selection.
First, what’s the insight and output torque requirements? Next, verify vendor horsepower/torque charts and select the correct worm gear reducer.
If how big is the gearbox is going to be an important consideration after that check the reducer dimension specifications, not all producers make compact units. Actually, working with the proper supplier will help you not only find the right equipment reducer but also avoid some of the most typical errors in reducer selection. We provide a free guide to help you find the appropriate supplier to utilize.
For low and fractional horsepower app we offer two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major variations between these two models. Both feature the hollow or solid output shaft. Both models are compact and provide users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specs of your particular application or task is essential to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes at the top and bottom
• Flush fitting bearing caps simple to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is required. This right angle equipment motor is indeed versatile it could work just about anywhere.
Features & Options
Double Shaft or Single Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power provides designed and built exclusive, high precision mini gearboxes that cannot be found somewhere else. Our miniature gearboxes are available in several configurations, including worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that are designed and built to meet your unique specifications.
Contact us for the mini gearbox the application requires, or demand a quote upon a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also small worm gearbox called reducers, gear reducers, acceleration reducers, equipment drives, and gearmotors. All terms can be used more or less interchangeably. Please be aware that the links for our small gear drives include details on the full selection of frame sizes for that series or design.
Bevel Box Micro Equipment Drive
Our bevel package miniature equipment drives are app rated for the ideal balance of overall performance and cost. Torque could be balanced to meet your RPM and working life requirements. Light-weight with low backlash performance (less than 1°, with choice of 1/2”).
Output torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input boosts to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a concise package. They offer an output shaft at 90° from the input, and so are available in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminum housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc mins of backlash or better. Also called “shaft to bore gearboxes,” these devices provide a single insight shaft that protrudes from opposing sides of the housing; output can be a keyed bore. Standard solitary- and double-end shafts can be found and supplied with keys and retainer bands. An array of gear ratios and insight sizes are available to meet your preferences.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Obtainable in ratios from 5:1 to 120:1
Rated for input boosts to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and permanent lubrication. They provide two input shafts on reverse sides of the framework, with two result shafts perpendicular to the input shafts. Our mini 4 shaft worm gear drives deliver high performance functionality with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input speeds up to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes produce an output at 90° from the insight. They deliver superior performance in an amazing array applications and are constructed with small footprints, making them ideal for procedures where space is limited. They offer high efficiency with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives are available in two frame sizes, and are rated for boosts to 3,000 RPM. Light weight aluminum housings and stainless steel gears and shafts make these inline spur gearboxes hard and corrosion resistant, for your many demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm gear reducers deliver excellent performance with high efficiency, and feature rugged building for challenging power transfer operations. Available in three equipment ratios (5:1, 10:1, 20:1), our compact worm gearboxes are designed in extremely compact footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Small footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and produce a custom miniature gearbox to meet up your unique specs. We can produce customized micro gearboxes in virtually any configuration your application requires, with output torque amounts as high as 900Nm. We are able to work from your gearbox styles, reverse engineer a preexisting unit, or help you develop an all-new style that provides the performance you need. Ask for a quote on a customized miniature gearbox or contact us to discuss your unique requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and output shafts with drive crucial and retainer rings can be supplied to your specifications for any of our hollow bore miniature gearboxes. We provide a basic selection of single ended or dual ended shafts to put together in these gearboxes. All gearbox shafts are given keys and retainer rings.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our program engineers to go over your particular needs.
We offer a broad selection of misalignment shaft couplings in inch and metric bore sizes. Inch and metric precision surface shafts can be found from stock.
Contact Us for High Performance Miniature Gearboxes
We will be the miniature gearbox experts. Our micro gear drive models deliver superior overall performance in a little footprint, and are durable enough for challenging work environments. Contact us to find out more about our mini gearboxes, or ask for a quote on a custom model that’s tailored to your preferences.
Additional benefits of worm drive gearboxes include: