Technical Data –Chain Choice

For Use in Conditions Exposed to Water or Sea Water Drops
When chains are exposed to rainwater or sea water drops, reducing of power and brittleness by corrosion, sudden put on, bending failure by rusting and roller rotation failure and so forth. come about. In such scenarios, depending on the predicament, stainless steel or higher guard chains or chains with stainless steel parts are encouraged. The substantial guard chains are extremely rated by our shoppers. For applying chains under water, see the following “For In-water Use”.
For In-water Use
When working with chains in water or sea water, brittle fracture and corrosion must be taken into consideration together with the adverse problems stated in the above segment. For this function, we manufacture Water Remedy Conveyor Chains together with Traveling Water Display Transfer Chain, Rake Chain, Sewage Treatment method Chain, BT Bushing Chain for Water Therapy Drive Unit. Chains with stainless steel elements, with specially coated plates or stainless steel chains are proposed. On top of that, as corrosion resistant bearings which can be utilized in-water, stainless steel, Diesten and Diemec bearings can be found.
For Use in Acidic or Alkali Environments
In acidic or alkali environments, stress corrosion, hydrogen embrittlement, intergranular corrosion, and so on. are brought on along with widespread challenges encountered in other corrosive environments. Section “5-4 Corrosion Resistance Towards Numerous Substances” lists the corrosion resistance of chain components to many substances.
Notably, elements made from 13Cr stainless steel may rust based on problems.
Chain existence is extended by periodical lubrication. Lubrication also minimizes the required power. Nevertheless, note that, below some services ailments, lubrication may perhaps adversely affect the chain, or be regulated by law, and so on.
?Lubrication intervals
It is actually a standard rule to lubricate about once a week, but depending on the conditions for the duration of operation as well as state of lubricating oil, lubricate as wanted.
As lubrication strategies, coating or drip lubrication is recommended. As for the areas of lubrication, see the following illustration.
For efficient lubrication, clean the chain just before lubrication. Choose a lubrication method appropriate for that unique services issue.
?Automated lubrication (oiling) device
We now have numerous automated lubrication (oiling) devices. Seek advice from us if you are utilizing chains in a setup in which lubrication is tough or in case you program to automate lubrication.
When Lubrication Is just not Doable
Lubrication is definitely important for extending the life in the chain. Even so, beneath some ailments, lubrication may not be practical.
Prevent lubrication from the following instances:
1) The chain is embedded during the loads (granular material, powder, and so forth.).
2) Granular material and powder deposit within the chain when carried by pan or apron conveyors. Here, lubrication operates adversely.
3) The chain temperature becomes higher.
4) Ailments in which lubrication is prohibited by regulations or laws.
Once the chain cannot be lubricated or is being used to convey food, we propose utilizing our resin, oilless or stainless steel bearings.
For Use with Foods
When working with chains for driving or conveying inside a food processing machine, specially when the food immediately contacts the chain, stainless steel is needed by FDA laws.
Stainless steel chains (S3) made from 18-8 stainless steel are recommended. We also manufacture chains with neat appearance that give a clean impression intended notably for use with food merchandise. Get hold of us for far more information.



As one of leading gearbox-worm manufacturers, suppliers and exporters of mechanical products, We offer gearbox-worm and many other products.

Please contact us for details.


Manufacturer supplier exporter of gearbox-worm.

Recent Posts